STL to 3MF Converter

Use this free STL to 3MF converter to turn a STL model into a 3MF file without installing software. Add your file, check the 3D preview, and download the 3MF result. The conversion runs in your browser, so the model never leaves your device. STL has no units or color. The 3MF will be written in millimetres with the mesh as a single grey object.

  • Free, no watermark
  • No signup
  • Files never leave your device
Loading 3D viewport…
Starting 3D engine…

STL to 3MF on a real model

A four-color 3D model is converted from STL to 3MF in your browser. The produced file is loaded back and measured, so what you see below is the real result.

STL → 3MF

Loading 3D viewport…
Converting the sample…
Loading 3D viewport…
Original
STL
Converted
3MF

Drag the handle to compare. Rotate either side and both follow. Sample: “Blue-and-white vase” by Format3D, CC0, generated by Format3D.

How to convert STL to 3MF

Three steps, no account, nothing to install.

format3d.art
The Format3D workbench with a 3D model open in the viewport and the three-step panel on the rightThe format buttons and the advanced settings open in the conversion panelA finished conversion with the download button and the result summary below the viewport

STL vs 3MF: what changes in the conversion

Use this to give a plain STL a more modern container: explicit millimetre units and a package that slicers such as Bambu Studio, PrusaSlicer and Cura open natively.

STL
Stereolithography

The oldest and most widely supported 3D printing format. It stores only a triangle mesh: no color, no materials, no units.

3MF
3D Manufacturing Format

A zipped XML format built for 3D printing. It stores geometry, units, colors and materials in a single file.

PropertySTL3MF
ColorNoYes, per object
TexturesNoOnly through extensions
UnitsNone (slicers assume mm)Declared in the file
File structureBinary or ASCII triangle listZIP package with XML
Best forSending a mesh to any printer or slicer3D printing projects

What stays

  • the full triangle mesh. Duplicate vertices are welded, which usually makes the file smaller than the STL.
  • a 3MF package with the unit declared as millimetres. Nothing is invented: no colors, materials or print settings are added.

What changes or is lost

  • holes or non-manifold edges in the STL stay in the 3MF. Conversion does not fix the mesh.

What is STL?

STL dates from the 1980s and is still the lowest common denominator of 3D printing. It describes a surface as a list of triangles and nothing else: no color, no material, no unit and no object names. Because it is so simple, practically every slicer, CAD tool and print service accepts it.

What is 3MF?

3MF was created by the 3MF Consortium to replace STL for additive manufacturing. A .3mf file is a ZIP package holding an XML description of one or more meshes, their units, materials and the arrangement of parts on the build plate. Slicers such as Bambu Studio, PrusaSlicer and OrcaSlicer also write their own print settings into it, which other programs ignore.

STL to 3MF troubleshooting

The problems people actually run into, and the quickest fix for each.

  1. 01

    My slicer says the 3MF is not manifold

    The mesh problems were already in the STL. Run a repair step (for example the slicer’s built-in repair or Windows 3D Builder) and convert again.

  2. 02

    The model appears 1000× too small or big

    STL has no units, so we assume millimetres. If it was modelled in metres or inches, set the scale in Settings.

  3. 03

    The file is larger than I expected

    Binary STL is very compact. 3MF compresses with ZIP, but ASCII XML coordinates can still make it comparable in size.

STL to 3MF FAQ

Short answers to what people ask before converting STL files to 3MF.