GLB to STL Converter
Use this free GLB to STL converter to turn a GLB model into a STL file without installing software. Add your file, check the 3D preview, and download the STL result. The conversion runs in your browser, so the model never leaves your device. Textures, PBR materials and animation will be dropped. The model is rotated to Z-up and scaled from metres to millimetres.
- Free, no watermark
- No signup
- Files never leave your device
GLB to STL on a real model
A four-color 3D model is converted from GLB to STL in your browser. The produced file is loaded back and measured, so what you see below is the real result.
GLB → STL
Drag the handle to compare. Rotate either side and both follow. Sample: “Blue-and-white vase” by Format3D, CC0, generated by Format3D.
How to convert GLB to STL
Three steps, no account, nothing to install.



GLB vs STL: what changes in the conversion
Use this to 3D print a model downloaded from the web, a game asset or an AR/VR scene.
The “JPEG of 3D” for the web: one binary file with geometry, PBR materials, textures and animation.
The oldest and most widely supported 3D printing format. It stores only a triangle mesh: no color, no materials, no units.
| Property | GLB | STL |
|---|---|---|
| Color | Yes (PBR materials) | No |
| Textures | Yes, embedded | No |
| Units | Metres | None (slicers assume mm) |
| File structure | Single binary file | Binary or ASCII triangle list |
| Best for | Web, AR and real-time 3D | Sending a mesh to any printer or slicer |
What stays
- the mesh geometry of every visible node, with the scene hierarchy’s transforms applied.
What changes or is lost
- textures, PBR materials, vertex colors, animation, cameras and lights.
- glTF is Y-up; printing software expects Z-up. By default we rotate it upright for printing.
- glTF is in metres. By default we scale ×1000 so a 0.1 m model becomes 100 mm in your slicer.
What is GLB?
GLB is the binary form of glTF 2.0, the Khronos Group’s open format for delivering 3D to the web, AR and game engines. Geometry, PBR materials, textures and animation are packed into a single file that loads quickly in three.js, Babylon.js, model-viewer and most engines. glTF uses metres and a Y-up coordinate system.
What is STL?
STL dates from the 1980s and is still the lowest common denominator of 3D printing. It describes a surface as a list of triangles and nothing else: no color, no material, no unit and no object names. Because it is so simple, practically every slicer, CAD tool and print service accepts it.
GLB to STL troubleshooting
The problems people actually run into, and the quickest fix for each.
- 01
The STL is empty
The GLB may contain only points, lines or animation data. Only triangle meshes can be written to STL.
- 02
The model is a surface, not a solid
Many game assets are thin shells with open or overlapping geometry. Slicers need a closed (watertight) volume; repair it before printing.
- 03
Skinned or animated characters look posed oddly
We export the rest pose geometry. Pose the character in your 3D software before exporting if you need a specific pose.
GLB to STL FAQ
Short answers to what people ask before converting GLB files to STL.