3MF to STL Converter
Use this free 3MF to STL converter to turn a 3MF model into a STL file without installing software. Add your file, check the 3D preview, and download the STL result. The conversion runs in your browser, so the model never leaves your device. STL stores geometry only. Colors, materials and slicer print settings in the 3MF will not carry over.
- Free, no watermark
- No signup
- Files never leave your device
3MF to STL on a real model
A four-color 3D model is converted from 3MF to STL in your browser. The produced file is loaded back and measured, so what you see below is the real result.
3MF → STL
Drag the handle to compare. Rotate either side and both follow. Sample: “Blue-and-white vase” by Format3D, CC0, generated by Format3D.
How to convert 3MF to STL
Three steps, no account, nothing to install.



3MF vs STL: what changes in the conversion
Use this when a tool, printer or service only accepts STL, or when you want a clean mesh without the slicer project data that comes with a 3MF.
A zipped XML format built for 3D printing. It stores geometry, units, colors and materials in a single file.
The oldest and most widely supported 3D printing format. It stores only a triangle mesh: no color, no materials, no units.
| Property | 3MF | STL |
|---|---|---|
| Color | Yes, per object | No |
| Textures | Only through extensions | No |
| Units | Declared in the file | None (slicers assume mm) |
| File structure | ZIP package with XML | Binary or ASCII triangle list |
| Best for | 3D printing projects | Sending a mesh to any printer or slicer |
What stays
- every triangle of every object, with the build-plate transforms already applied, so parts sit where they were in the 3MF.
What changes or is lost
- colors, multi-material assignments, object names, and slicer-specific data such as supports, modifiers, infill and plate layouts.
- all objects in the 3MF are written into one STL. STL has no concept of separate objects.
- 3MF declares its unit (usually millimetres) and we convert to millimetres, which is what slicers assume for STL.
What is 3MF?
3MF was created by the 3MF Consortium to replace STL for additive manufacturing. A .3mf file is a ZIP package holding an XML description of one or more meshes, their units, materials and the arrangement of parts on the build plate. Slicers such as Bambu Studio, PrusaSlicer and OrcaSlicer also write their own print settings into it, which other programs ignore.
What is STL?
STL dates from the 1980s and is still the lowest common denominator of 3D printing. It describes a surface as a list of triangles and nothing else: no color, no material, no unit and no object names. Because it is so simple, practically every slicer, CAD tool and print service accepts it.
3MF to STL troubleshooting
The problems people actually run into, and the quickest fix for each.
- 01
The STL is empty or tiny
Some slicer projects (e.g. Bambu Studio or PrusaSlicer files) store meshes in extra component files or use features this reader does not support. Re-export from the slicer as a plain 3MF, or export STL directly from the slicer.
- 02
The model is the wrong size
The 3MF unit is read from the file. If the result is 25.4× too large or small, the original was probably saved in inches; use the scale setting to correct it.
- 03
Parts appear stacked or in odd places
We bake the 3MF build transforms into the STL. If objects overlap in the result, they overlapped on the plate in the original file.
3MF to STL FAQ
Short answers to what people ask before converting 3MF files to STL.